Requesting Spare Parts - Fiorenzato ALLGround Installation, Use And Maintenance Manual

Anomaly
The motor stops
during grinding.
ATTENTION! If the anomaly persists even after carrying out the suggested
corrective actions, or if functional anomalies not listed in the table occur,
contact a specialist technician and have the appliance checked.
8

REQUESTING SPARE PARTS

If you need to replace parts on your grinder, you can request original spare parts from
the spare parts service of Fiorenzato M.C. S.r.l. or from one of its Service Centres or
Authorised Resellers.
ATTENTION! Remember that the interventions to replace the grinders and in
general all the internal parts of the grinder must be carried out by specialist
technical personnel.
ATTENTION! Fiorenzato M.C. S.r.l. is not responsible for any injury to
persons and/or damage to the appliance caused by the replacement of
components with non-original spare parts and performed by unqualified
personnel.
Fiorenzato | Cod. AllGround_001 Ed. 01/2021
Cause
Motor protection thermal
cut-out intervention
due to blocking of the
grinding system in the
presence of objects or
foreign bodies between
the grinders.
Solution
• Turn off the appliance and wait
for it to cool completely.
• Disconnect the appliance from
the power supply.
• Close the shutter and remove
the supply hopper.
• Open the removable chamber
and clean the grinders and
remove any foreign bodies.
• Reassemble the appliance and
start a grinding cycle.
EN
75 / 116