EN
2.3 Identification of the main parts of the grinder
The
grinder consists of a machine body and a supply hopper on the top
to load the roasted coffee beans before grinding them. With reference to Fig. 2, the
grinder consists of the following parts:
1
Hopper lid
2
Coffee beans hopper
3
Shutter on hopper
Ring nut for grinding size
4
adjustment
Locking/unlocking ring nut
5
pin
Removable chamber with
6
upper grinder
Machine/user interface
7
display
Removable ground coffee
8
dispensing tube
Adjustable filter holder cup
9
support fork
10 Machine on/off switch
2.4 Intended uses
This appliance has been designed exclusively for the grinding of roasted coffee beans.
Any other use is to be considered improper and therefore dangerous. The manufacturer
declines all responsibility for any damage due to improper or incorrect use. Do not use
the appliance to grind other types of food or other granular materials.
50 / 116
1
2
5
6
4
7
8
9
Fig. 2 - Identification of parts
Fiorenzato | Cod. AllGround_001 Ed. 01/2021
3
10