Fiorenzato ALLGround Installation, Use And Maintenance Manual page 55

• Anti-intrusion
chamber (Fig. 4)
To prevent contact with the grinders when the
hopper is removed from the appliance, inside
the removable chamber (Item 1) there is an
anti-intrusion device (Item 2) which prevents
accidental introduction of the user's fingers
into the grinding chamber.
Locking/unlocking ring nut pin (Fig. 5)
•
To prevent the accidental removal of the ring
nut (Item 1), when the limit switch position is
reached, a pin is provided (Item 2) that clicks
upwards to lock it in position, preventing it
from being removed.
If the ring nut is removed with the grinder
running, it is stopped instantly and the
"WARNIG" screen appears on the display
(Item 3) with voltage to the motor being cut to
make the machine safe.
The ring nut may only be removed when
the machine is not electrically powered (see
chapter "6 - Maintenance").
• Removable chamber presence detection
microswitch (Fig. 6)
This microswitch (Item 1), which can only be
activated by the special pin located on the
removable chamber (Item 2), only allows the
appliance to start if the removable chamber
itself (Item 3) has been inserted in the correct
working position in the machine body (Item 4)
and locked in place by the adjustment ring nut
(see Fig. 5 Item 1).
Fiorenzato | Cod. AllGround_001 Ed. 01/2021
device on removable
2
Fig. 4
2
1
3
Fig. 5
3
1
Fig. 6
EN
1
2
4
55 / 116