Grinder Maintenance; Ordinary Maintenance - Fiorenzato ALLGround Installation, Use And Maintenance Manual

6

GRINDER MAINTENANCE

6.1 Ordinary maintenance

Your grinder does not require any significant routine maintenance operations
except for periodic cleaning that must be done by following the operating procedures
below.
ATTENTION! Before doing any cleaning work, disconnect the grinder from
the power supply by turning the appropriate switch to the "O" (OFF) position
(Fig. 14) and remove the power plug from the relative power socket (Fig. 15).
Fig. 14
Frequency
After each use
After each use
Every 6 months
Whenever necessary
ATTENTION! "Red speed" type grinders, whose surface has been specially
treated to increase resistance to wear, are installed in
This treatment is done to ensure that the grinders work in optimal conditions
throughout the machine's entire life. If, however, the grinders are damaged
(e.g. if the removable chamber is accidentally dropped on the floor and/or
if any hard foreign objects have been accidentally placed in the grinding
chamber), they must only be replaced by a trusted specialist repair service.
Fiorenzato | Cod. AllGround_001 Ed. 01/2021
ORDINARY MAINTENANCE INTERVENTIONS
Type of Intervention
Precise equipment cleaning
Supply cable status check
Final cleaning of grinders
Storing the grinder
EN
Fig. 15
Paragraph
6.1.1
6.1.2
6.1.3
6.1.4
grinders.
67 / 116