Adjustment Type And Grinding Size; Filter Holder Cup Support Fork Height Adjustment - Fiorenzato ALLGround Installation, Use And Maintenance Manual

5.4 Adjustment type and grinding size

Grinding type selection
Turn the adjustment ring nut (Item 1)
located under the hopper (Item 2) until the
red notch on the front of the removable
chamber (Item 3) is in the ring nut sector
corresponding to the type of grinding you
want to do (for Espresso, for Moka or for
Infusion Filter). The change in grinding
type is displayed.
Grinding size adjustment
After having selecting the type of grinding
(Espresso, Moka or Filter), you can adjust
the grinding size to obtain coarser or finer
coffee.
Adjust the adjustment ring nut again (Item
1), keeping the red notch (Item 3) in the
previously selected sector.
• Turn the ring nut clockwise to grind
coarser;
• Turn the ring nut anti-clockwise to
grind finer.
The adjustment must be made with the
motor running. It is advisable to grind
small quantities of coffee for a visual
assessment of the degree of grinding.

5.5 Filter holder cup support fork height adjustment

• Loosen the fixing screw (Item 1);
• Adjust the fork height appropriately
(Item 2), depending on the size of the
espresso filter cup (e.g. Item 3) or the
moka filter to be filled with coffee.
• Tighten the screw (Item 1) to lock the
fork (Item 2) in the new position.
Fiorenzato | Cod. AllGround_001 Ed. 01/2021
Top view without hopper
1
+
2
+
2
1
EN
3
-
-
3
65 / 116