Machine Controls; Switch; Machine Management Function Screens And Buttons - Fiorenzato ALLGround Installation, Use And Maintenance Manual

5.3 Machine controls

All the control devices on the grinder are described below.
5.3.1

Switch

It is used to turn the appliance on and off.
• Rotated to "OFF": the appliance
is switched off (power supply
disconnected).
• Rotated to "ON": the appliance is on
(electrically powered).
5.3.2

Machine management function screens and buttons

The display is the communication interface between the appliance and the user and
shows the specific machine management screens based on the type of grinding selected
by the adjustment ring nut.
Start-up screen
When the grinder is switched on (the switch
is in the "ON" position), the display shows the
start-up screen with the grinder logo for a few
seconds (Item 1), the version of the software
installed (Item 2) and a "QR" code with the
manufacturer's logo (Item 3).
By scanning the "QR" code with an enabled
smartphone you can connect to the
Fiorenzato M.C. S.r.l. website and watch an
explanatory video on how to operate your
grinder.
After the set display time has elapsed, the
display automatically shows the machine
management screen relating to the grinding
mode set at that time with the adjustment ring
nut (Espresso, Moka or Filter).
Fiorenzato | Cod. AllGround_001 Ed. 01/2021
2
EN
3
1
61 / 116