Using The Grinder; Preparing To Use The Grinder; Selecting The Grinding Type - Fiorenzato ALLGround Installation, Use And Maintenance Manual

EN
5

USING THE GRINDER

5.1 Preparing to use the grinder

Once the installation has been completed, the grinder is ready to use and can be loaded
with the coffee beans to be ground. With reference to Fig. 12, to load the coffee beans,
proceed as follows:
• Fit the hopper (Item 1) on the
removable chamber (Item 2).
• Make sure that the shutter (Item 3) is
completely closed.
• Remove the lid (Item 4) and fill the
hopper with the roasted coffee beans
to be ground.
• Close the hopper with the relative lid
(Item 4).
• Gradually open the shutter (Item 3) to
allow the flow of coffee beans into the
grinding chamber.
• At this point the grinder is loaded and
ready to be used.

5.2 Selecting the grinding type

• By turning the adjustment ring nut
(Item 1), you can select the type of
grinding desired between "Filter",
"Moka" and "Espresso".
• The machine management screen,
corresponding to the type of grinding
selected, is displayed automatically.
• Select the grinding type by
moving the sector of the ring nut
corresponding to the "Filter", "Moka"
or "Espresso" adjustment to the red
mark on the removable chamber
(Item 2).
60 / 116
4
1
2
Fig. 12
2
ESPRESSO MOKA
Fig. 13
Fiorenzato | Cod. AllGround_001 Ed. 01/2021
3
1
FILTER