Configure Your Machine For A Wireless Network Using The One Push Method Of Wi-Fi Protected Setup ™ (Wps) Or Aoss - Brother MFC-J775DW Online User's Manual

Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless
Network > Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected
™
Setup (WPS) or AOSS
Configure Your Machine for a Wireless Network Using the One Push
Method of Wi-Fi Protected Setup
If your wireless access point/router supports either WPS (Push Button Configuration) or AOSS
™
WPS or AOSS from your machine's control panel menu to configure your wireless network settings.
• Routers or access points that support WPS are marked with this symbol:
• Routers or access points that support AOSS
1. Press Settings.
2. Press a or b to select the following:
a. Select [Network]. Press OK.
b. Select [WLAN]. Press OK.
c. Select [WPS/AOSS]. Press OK.
3. When [Enable WLAN?] appears, press OK.
This will start the wireless setup wizard. To cancel, press Stop/Exit.
4. When the LCD instructs you to start WPS or AOSS
access point/router. Then press OK on your machine. Your machine will automatically detect which mode
™
(WPS or AOSS
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install drivers and software necessary for operating your
device, insert the Brother installation disc into your computer or go to your model's Downloads page on the
Brother Solutions Center at support.brother.com.
Related Information
• Additional Methods of Configuring Your Brother Machine for a Wireless Network
™
) your wireless access point/router uses and try to connect to your wireless network.
™
(WPS) or AOSS
™
are marked with this symbol:
™
, press the WPS or AOSS
™
™
, you can use
™
button on your wireless
285