Short Code Memory - Nokia NSE-6 SERIES Service Manual

NSE/M–1/3/6
Service Software Instructions
Load File button (ALT+L):
Edit... button (ALT+D):
OK button (ENTER):
Cancel button (ESC):
Short Code Memory... command
Activation
Alt, S,C
This command is used for reading, storing and modifying the SIM/ME
SCM values. Before dialog is opened number of memory places is read
from phone. If phone does not have SCM in ME Memory selection is dis-
abled and SIM is used as default. If SIM is selected user may be asked
to insert PIN and/or wait for SIM to wake up.
Function opens the following Edit SCM dialog:
Dialog mode: modal
Edit SCM dialog has the following items:
Page 64
User can load user settings from file.
Start Windows Paintbrush to edit loaded or saved graphical
Wake up message. This picture is not available, if phone does
not support WUG.
Writes user settings to phone.
Closes the dialog box
Status Bar Text
Open Edit SCM dialog box.
PAMS
Technical Documentation
Original 08/98