Attaching The Identification Labels - Yamaha T8 Rigging Manual

ATTACHING THE IDENTIFICATION
LABELS
1) Attaching the labels to the cables (in case
of a single engine installation, use only the
Throttle and Shift labels.)
Attach the labels to their corresponding cables.
Two identical labels are provided for each
identification. Attach them to both ends of
the cable.
2) Attach the labels to the JUNCTION UNIT
AND ACTUATOR (In case of a single
engine installation, the JUNCTION UNIT
AND ACTUATOR need not be identified
by labels.
Attach the label to the JUNCTION UNIT
AND ACTUATOR at a convenient place for
easy reference. Remove the junction cover
to attach the labels.
10A-15