Yamaha T8 Rigging Manual page 234

Outboard Rigging Guide - 2001
REMOTE CONTROL CABLES
Yamaha remote control cables are available in
lengths from 6 feet to 36 feet. The cables utilize
10-32 threaded ends. Measure from the location
of the remote control box to the outboard motor
along an unobstructed path that will allow the
cables to be routed as straight as possible. Avoid
sharp bends, and be sure to allow for an addition-
al loop of approximately three feet, if necessary.
Part Number
ABA-CABLE-06-GY
ABA-CABLE-07-GY
ABA-CABLE-08-GY
ABA-CABLE-09-GY
ABA-CABLE-10-GY
ABA-CABLE-11-GY
ABA-CABLE-12-GY
ABA-CABLE-13-GY
ABA-CABLE-14-GY
ABA-CABLE-15-GY
ABA-CABLE-16-GY
ABA-CABLE-17-GY
ABA-CABLE-18-GY
ABA-CABLE-19-GY
ABA-CABLE-20-GY
ABA-CABLE-22-GY
ABA-CABLE-24-GY
ABA-CABLE-26-GY
ABA-CABLE-28-GY
ABA-CABLE-30-GY
ABA-CABLE-32-GY
ABA-CABLE-34-GY
ABA-CABLE-36-GY
Additional Parts Required
Control
All Controls
701 Control See Note
703 Control
NOTE: A switch panel is required for manual models if
used on a 9.9 to 25hp electric model.
Length
6 FEET
7 FEET
8 FEET
9 FEET
10 FEET
11 FEET
12 FEET
13 FEET
14 FEET
15 FEET
16 FEET
17 FEET
18 FEET
19 FEET
20 FEET
22 FEET
24 FEET
26 FEET
28 FEET
30 FEET
32 FEET
34 FEET
36 FEET
Part Number
ABA-CABLE-XX-GY
6G1-48501-50-00
6G8-48501-03-00
63V-48501-00-00
6L2-48501-10-00
6H4-48501-80-00
6L2-48501-10-00
4-47
Cable Measuring
Use the following examples as a guide for mea-
surement. Obviously, different boats will required
different routing and therefore different lengths.
THRU
TRANSOM
TRANSOM
WELL
Description
Control Cable of XX ft length - Need 2
6-8HP Remote conversion kit
FT/F9.9hp Remote conversion kit
9.9-15hp Remote conversion kit
25HP Remote conversion kit
40HP Manual Remote conversion kit
25HP Remote conversion kit