Yamaha T8 Rigging Manual page 386

Outboard Rigging Guide - 2001
11. Screw in the cable joint (over the remote con-
trol cable) a minimum of 8mm (0.31 in).
Align joint hole with the cable joint set pin,
and lock it with the lock nut. Lock the cable
joint to the cable joint set pin with this lock
plate.
WARNING
I f the cable is not screwed in at least 8mm, the
cable joint could break. T his could cause loss of
control and an accident.
25HP Remote Control Attach. Kit
12. Fit the new cover.
Additional Parts Required
Part Number
6J8-48511-51-4D
7-25
Description
Steering Hook
(Manual Model Only)