Twin Engine Fuel Management Gauge - Yamaha T8 Rigging Manual

Outboard Rigging Guide - 2001

Twin Engine Fuel Management Gauge

The fuel management gauge operates only on one
engine of a twin engine installation.
No wiring is connected to the second ignition
source. The fuel management gauge and
speedometer must be connected to one common
power source. The power source must be supplied
by one ignition switch.
*
NOTE: The following part numbers
are shown on page 3-39 in the "1999
Outboard Rigging Guide." They can
be ordered from Kent-Moore at
1-(800)-345-2233.
5-34
Fuel Management Gauge
*
*
*
*
*
*