Yamaha T8 Rigging Manual page 19

Outboard Rigging Guide - 2001
Control Cable Installation
1. Choose a mounting location for the control
head which will provide comfortable opera-
tion and unobstructed movement of the hand
lever and control mechanism.
NOTE: Minimum clearance below the binnacle
control mounting surface for cables is 16". Also,
minimum clearance behind the 703 control box
for the control cables is 16".
2. Measure from control head position along an
unobstructed path to shift and throttle con-
nections. Cable lengths are overall length.
When a measurement is in feet and inches,
specify next whole foot. Add 3 feet for loop
(see illustration below).
TYPICAL CABLE ROUTING
Remote Control Cables
Yamaha remote control cables are available in
lengths from 6 feet to 36 feet. The cables utilize
10-32 threaded ends.
PART NUMBER
ABA-CABLE-06-GY
ABA-CABLE-07-GY
ABA-CABLE-08-GY
ABA-CABLE-09-GY
ABA-CABLE-10-GY
ABA-CABLE-11-GY
ABA-CABLE-12-GY
ABA-CABLE-13-GY
ABA-CABLE-14-GY
ABA-CABLE-15-GY
ABA-CABLE-16-GY
ABA-CABLE-17-GY
ABA-CABLE-18-GY
ABA-CABLE-19-GY
ABA-CABLE-20-GY
ABA-CABLE-22-GY
ABA-CABLE-24-GY
ABA-CABLE-26-GY
ABA-CABLE-28-GY
ABA-CABLE-30-GY
ABA-CABLE-32-GY
ABA-CABLE-34-GY
ABA-CABLE-36-GY
x
General Rigging Information
LENGTH
6 FEET
7 FEET
8 FEET
9 FEET
10 FEET
11 FEET
12 FEET
13 FEET
14 FEET
15 FEET
16 FEET
17 FEET
18 FEET
19 FEET
20 FEET
22 FEET
24 FEET
26 FEET
28 FEET
30 FEET
32 FEET
34 FEET
36 FEET