User Groups; Root And Admin Usernames And Passwords; Adding Port Administrators And Users; Ways To Configure The Digi Cm - Digi CM User Manual

User Groups

The Digi CM comes with built-in user groups, defined by access levels. The
following table lists user groups, their access rights, and default user names.
-----------
Root
System Admin
Port Admin
User

Root and Admin Usernames and Passwords

The Digi CM comes with two default users; root and system admin.
The user names of the Digi CM are case sensitive.

Adding Port Administrators and Users

The system administrator and root user can add port administrators and
additional users easily with the web interface by choosing System
administration > User administration > Add user.

Ways to Configure the Digi CM

This section discusses the three ways to configure the Digi CM using the web
interface, configuration menu, or command line interface.
Web Interface
The web interface provides an easy way to configure the Digi CM. The root
user and system administrator can configure all features through the web. Port
The Digi CM web
administrators can configure ports, including port clustering, but cannot modify
interface features
HTTPS for secure
system settings. No other users can use the web interface for configuration.
access.
To access the web interface, enter the Digi CM IP address or host name in a
browser's URL window. The following page is displayed after login.
Chapter 1
Group Access Privileges
Ports
yes
yes
yes
yes
User Name
Configuration
Privileges
Command
Ports
Line
yes yes
yes
yes
(read only)
no yes
no no
Default Password
root
admin
Introduction
Defaults
System Login
yes root
yes admin
no -
no -
dbps
admin
Password
dbps
admin
-
-
11