Overview
User groups
The Digi CM unit comes with four built-in user groups pre-defined by roles or access levels. The
following table lists the four user groups, their access rights, and default user names. The Digi CM
unit supports access lists for user privileges. These lists can contain multiple users and define
specific port rights. If e.g. you have multiple people responsible for the Sun Servers in your company
and you want to give them identical access rights you can create a "Sun-admin" access list. Assign
this access list rights to every port that is attached to a Sun Server and add all the Sun
administrators to the "Sun-admin" Access List.
Group
-----------
Root
System Admin
Port Admin
User
Root and admin usernames and passwords
The Digi CM unit comes with two default users; root and system admin. The user names of the the
Digi CM unit are case sensitive.
User name
root
admin
Adding port administrators and users
The system administrator and root user can add port administrators and additional users easily
with the web interface by choosing System administration > User administration > Add user.
Access lists
Multiple users can be defined within Access lists with access privileges or restrictions to the ports.
See
Add an Access List to the Digi CM Unit
Ways to configure the Digi CM
This section discusses the three ways to configure the Digi CM unit using the web interface,
configuration menu, or command line interface.
Digi CM User Guide
Access Privileges
Ports
Command Line
yes
yes
yes
yes
(read only)
yes
no
yes
no
Default password
dbps
admin
for more information.
Configuration
Privileges
Defaults
Ports
System
Login
yes
yes
root
yes
yes
admin
yes
no
-
no
no
-
User groups
Password
dbps
admin
-
-
12