Assa Abloy 724 Installation Instructions

Shim Kits
Exit Device
Installation Instructions
Shim Locations
1
#724, 724WS, 724NS, and 224 Shim Kits for Surface Vertical Rod Exit Devices
Vertical Latch Shim
60-7010-1060-200
Rod Guide Shim
60-7010-1065-200
Device Shim
Standard
60-7100-1004-200
2100/1800 and
Narrow Stile
60-7000-1106-200
#723, 723WS, 723NS, 723NSWS, and 223 Shim Kits for Rim, Mortise,
2
and CVR Exit Devices
WARNING
This product can expose you to lead which is known to the state of California to cause cancer and birth defects or other
reproductive harm. For more information go to www.P65warnings.ca.gov.
WARNING
Attention Installer: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening,
and ASSA ABLOY makes no representations or warranties concerning what such impact may be in any specific situation. When
retrofitting any portion of an existing fire-rated opening, or specifying and installing a new fire-rated opening, please consult with a
code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
1-855-557-5078 • www.assaabloy.com
Copyright © 2001, 2013, 2023, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Note: Use shim in addition to the Latch
Mounting Plate. Top and Bottom.
Device Shim
Standard
60-7100-1004-200
2100/1800 and
Narrow Stile
60-7000-1106-200
Device End Cap Shim
7000 Series - 60-7000-1107-200
2100/1800 Series - 60-2000-1181-200
Notes:
1. Each standard shim kit contains 2 sets of 1/8"
thick shims. Windstorm (WS) shim kits contain
3 sets of 1/8" thick shims.
2. Place shims, as required. Use (1) shim for
each 1/8" (3mm) of device lift needed. When
mounting the device, position shims as shown,
using the installation instructions packed with
the unit. Use longer screws provided.
3. For Concealed Vertical Rod Device see yoke pin
shim location per illustration on page 2.
Device End Cap Shim
7000 Series - 60-7000-1107-200
2100/1800 Series - 60-2000-1181-200
80-9470-0724-000 12/23