Assa Abloy Rixson 73ER Manual

Model 73ER Overhead Concealed Closer
With Emergency Release Hinge
Non-Hold Open and Hold Open
Metal Frame Installation Instructions
WARNING
This product can expose you to lead which is known to the state of
California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65warnings.ca.gov.
7
Model 73ER, Emergency Release Hinge Hung
Components
(Supplied fasteners shown on page 3)
70202- (finish)
Cover Plate
Closer Body
Tools Needed
Phillips
Screwdriver
7
Copyright © 2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
IS73ER Rev 1 10/21
6
73 LAP
5/16" 3/8"
Flathead
Screwdriver Hex Wrenches
6
Approved 2021-10-20
These instructions utilize Markar and Pemko Anti-Barricade
Rescue Hardware, supplied separately, to illustrate an emergency
release hinge installation. For other manufacturers' hinge and/or
stop products, please consult Rixson Support for templating and
installation modifications.
5 4
READ AND FOLLOW ALL INSTRUCTIONS. SAVE THESE INSTRUCTIONS.
Arm
70218- (finish)
Optional Hold Open Slider Centering
Assembly (90254) Hub (70219)
AND
ASSA ABLOY Accessories and Door Controls Group, Inc.
1/4-20 3/16"
#7
for Metal for Wood
Drill
5 4
3
Track
(90239)
Retrofit Track Spacer and
Screws, Optional (90260)
Not for new installation. Replacement
only. Consult factory.
Slider Non Hold Open
(90253) Stop Block
(90255)
Framing
MATERIAL
Square
SEE BOM
WITH ASME Y14.5M - 1994
.03
.01 INCH
.005
MM
ANGLES
FRACTIONS 1/64
HEAT TREATMENT
THIRD ANGLE
SURFACE FINISH 63
SURFACE/FINISH
Tape
ASSA ABLOY Accessories and
Measure MASS
Door Controls Group, Inc.
0.029 lb
Monroe DC, NC
D001151786-007
CONFIGURATION
2
DATE CREATED DRAWN BY
09/01/2021 matba
DOCUMENT ID
D001151786-007
VOLUME SURFACE AREA DRAWING NUMBER (ALT ID)
Pencil
1594.634 in³ 5574.144 in²
LEGACY ID