Summary of Contents for Assa Abloy Sargent 7800 Series
Page 1
Installation Instructions 7800 Series with PT Paddle Trim Mortise Lock WARNING This product can expose you to lead which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65warnings.ca.gov. 1-800-727-5477 •...
7800 Series Mortise Lock with PT Paddle Trim Installation Instructions Installation of Cylinder For non-cylinder functions, proceed to STEP 4 • Thread the cylinder into the lockbody. • Verify the cylinder is flush with the collar and the logo is horizontal. •...
7800 Series Mortise Lock with PT Paddle Trim Installation Instructions Installation of Chassis • Check handing of chassis before installing mounting screws. • Insert the (2) mounting posts through the out- side chassis, then secure with (2) #8-32 x 5/8” machine screws through the inside chassis.
7800 Series Mortise Lock with PT Paddle Trim Installation Instructions 7800 PT Multi Function Lock Instructions How to Change Function of Lock The green catch screw must be located as designated on lock case to create desired function. 3 locations: •One for 05, 37 &...
7800 Series Mortise Lock with PT Paddle Trim Installation Instructions 7800 PT Multi Function Lock Instruction (continued) How to Change Hand of Lock NOTE: Red surface of locking piece must face secure (keyed/locked) side of door. To rotate locking piece: 1.
Page 8
SARGENT Manufacturing Company 100 Sargent Drive New Haven, CT 06511 USA 800-727-5477 www.sargentlock.com Founded in the early 1800s, SARGENT ® is a market leader in locksets, cylinders, door closers, exit devices, electro-mechanical products and access control systems for new construction, renovation, and replacement applications.