Table Of Contents; Warning - Assa Abloy Corbin Russwin Access 700 ED5000N Series Installation Instructions Manual

Exit devices for 9700 tcpip1 & pwi1 series trim

Hide thumbs

Table Of Contents

Table of Contents

ED5000N Series Exit Devices For

9700 TCPIP1 & PWI1 Series Trim

1) Warning ......................................................................................................... 2

2) General Description ...................................................................................... 3

3) Specifications / Features .............................................................................. 3

4) Product Illustration ....................................................................................... 4

5) Rim Exit Installation Instructions ................................................................. 5

6) Mortise Exit Installation Instructions ........................................................... 9

7) Install Outside Escutcheon ........................................................................13

8) PIP (PoE) Installation & Wiring .................................................................... 14

9) PWI (Wireless) Installation .......................................................................... 22

10) Operational Check ....................................................................................... 26

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

• Consult the dealer or an experienced technician for help

The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. This Class B digital apparatus

meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation is subject to the following two conditions: (1) this device may

not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Cet appareillage numérique de la classe B répond à toutes les exigences de l'interférence canadienne causant des règlements d'équipement. L'opération est

sujette aux deux conditions suivantes: (1) ce dispositif peut ne pas causer l'interférence nocive, et (2) ce dispositif doit accepter n'importe quelle interférence

reçue, y compris l'interférence qui peut causer l'opération peu désirée.

*Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Corbin Russwin, Inc.

makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an

existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official

(Authorities Having Jurisdiction) to ensure compliance with all applicable codes and ratings.

To avoid possible damage from electrostatic discharge (ESD), some basic precautions should be used when handling electronic components:

• Minimize build-up of static by touching and/or maintaining contact with unpainted metal surfaces such as door hinges, latches, and

mounting plates especially when mounting electronic components such as readers and controllers onto the door

• Leave components (reader and controller) protected in their respective anti-static bags until ready for installation

• Do not touch pins, leads or solder connections on the circuit boards

Wiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70), CSA 22.1, Canadian Electrical Code (CEC), Part I, Safety Standard

for Electrical Installations, local codes, and the Authorities Having Jurisdiction (AHJ).

This product is not intended for outside wiring per NFPA 70

To comply with "Fire Listed" doors, the batteries must be replaced with alkaline batteries only.

express written permission of Corbin Russwin, Inc. is prohibited.

Warning: Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user's authority to operate the equipment.