Assa Abloy Corbin Russwin Access 700 ED5000N Series Installation Instructions Manual page 15

ED5000N Series Exit Devices For
9700 TCPIP1 & PWI1 Series Trim
Supplied by CI
B-Splice
Crimp Connector
Ceiling
RJ45-M
24AWG
Stranded
Drain
Wire for
Earth
Ground in
15' Frame
Harness
Frame-Side
Harness
Assembly
(15' length)
Cable drain wire
concealed in
shrink tubing
Molex-M Molex-F
A
Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
8) PIP (PoE) Wiring & Installation (Continued)
Certified Integrator (CI) supplies and terminates
the B-Splice connector and the
male RJ45 connector from harness to
end user provided facility cable
To building or electrical ground
RJ45-F Jack Cable: CAT 5e or higher
24 AWG
NOTE: TIA/EIA 568-B added
only at lock side
Cable
: CAT 5e,
26 AWG stranded,
100ohm
C
Molex-F Molex-M
B
Ring Terminal
Secured to Lock
Mounting Plate
Wiring to TIA/EIA 568-B Standard
Patch Cable
Patch Panel to
PoE Switch
D
PoE
Lock
RJ45-M
Ground
15
Supplied by End User
PoE Switch
PoE Switch is
Terminated to
Earth Ground
Patch Panel
Approved Software
Notes:
• Connectors go on only one
way. They cannot be placed
in an incorrect position.
• Do not force and do not
offset connectors
• Be sure they are completely
seated (flush)
• PoE power source cannot be
connected to a receptacle
controlled by a switch