ED5000N Series Exit Devices For
9700 TCPIP1 & PWI1 Series Trim
4.
Install Rim Exit Device:
a. Seat device against door being careful to align vertical trim tailpiece to engage with
cross hole of device cam - see Figure 4a.
b. Fasten device to trim assembly using (2) 1/4-20 pan head screws (Fig. 4b).
c. Follow instructions packed with device to secure device to door.
d. Tighten all (4) screws (Fig. 4c).
Tailpiece
Fig. 4b
Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
5) Rim Exit Installation Instructions (Continued)
Inside Face of
Door
7
Tailpiece
Fig. 4a (door not shown)
Fig. 4c
Tighten
securely