Table of Contents
Advertisement
ED5000N Series Exit Devices For
9700 TCPIP1 & PWI1 Series Trim
1. Install Inside Mounting Plate
a. Feed reader cable through central opening of mounting plate (Fig. 12a, b).
b. Lockbody cable feeds from bottom (Fig. 12a, b).
c. Ensure ground lug is positioned upright (Fig. 12a, b).
d. Insert other three #8-32 x 1-7/8" flat head machine screws and tighten, fastening
the outside escutcheon to the door (Fig. 12a).
Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
9) PWI (Wireless) Installation Instruction
Mounting Plate
Fig. 12a
22
(4) #8 - 32 x 1-7/8" Flat
Head Machine Screws
(Through-bolts)
Fig. 12b
Advertisement
Table of Contents
