Assa Abloy Corbin Russwin Access 700 ED5000N Series Installation Instructions Manual page 21

ED5000N Series Exit Devices For
9700 TCPIP1 & PWI1 Series Trim
4. Inside Cover Installation
a. Install cover by hooking top edge on inside mounting plate.
b. Carefully press bottom of cover toward door without pinching wires.
c. Secure the cover with the security allen wrench.
Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
8) PIP (PoE) Wiring and Installation (Continued)
Fig. 11
End of PIP (PoE) Installation Instructions
Proceed to Section 10 - Operational Check
Security Allen
Screw
21