Support Software; Installing The Support Software - Procomp BIW2A User Manual

2
Configuration & Installation

Support Software

All versions of this motherboard come with a
software Support Disk that has both support soft-
ware and bundled software on it. The Support
Disk is for an entire range of motherboards. There
is more software on the Support Disk than is used
by this motherboard, so don' t be confused by the
software that doesn' t apply. An Operating System
must be installed on the primary system hard disk
drive before you can install support software. Most
of the support software is for Microsoft Windows
95, 98 or NT as these are the operating Systems
most likely to be used with this motherboard.

Installing the Support Software

The Support Disk is set to run automatically. The
disk has an installation interface that will appear
when you load the disk in the CD-ROM drive.
You can then make selections from the menu that
appears by clicking on an item with the mouse.
You can also use the arrow keys on the keyboard
to make a selection and then press the Enter key.
The installation interface has a number of nested
levels. The top level, which you see when the disk
loads looks like this. You can exit the level you are
in either by clicking on the Exit bar, selecting it
and pressing the Enter key or by pressing the Esc
key. The top level Exit bar closes the installation
program.
You will need to install support software under the
Intel and Audio Driver headings. The other soft-
ware is optional.
29