Connecting To The Front Panel Usb Port - Extron electronics DTP2 T 211 User Manual

Connecting to the Front Panel USB Port

Use the mini Type B USB port on the front panel (see figure 10) to connect the transmitter or
receiver to a host computer to configure the unit with SIS commands.
1. Connect a USB A to mini B cable between the front panel USB Config port and a
USB port of the PC.
DTP2 T 211 Transmitter DTP2 T 211 T
Figure 10.
If this is the first time the DTP2 211 has been connected to the PC, the
Hardware Wizard
The first screen offers to connect to Windows Update to search the web for the
appropriate driver needed for the USB port to communicate with the DTP2 211. This is
not necessary if the USB driver is already on your PC.
Figure 11.
2. Click on the appropriate radio button (see figure 11):
• Select the
connect to Windows Update only this one time.
Mini Type B
USB
USB Cable
STATUS
POWER
INPUT
FAR RND
LINK
CONFIG
OUTPUT
DTP2 T 211
OFF
itt
Connecting a PC to the DTP2 T 211 Front Panel USB Port
opens (see figure 11).
Found New Hardware Wizard Welcome Screen
radio button (
Yes, this time only
Type A
USB
USB
Ports
PC
1
2
3
4
) if you want your computer to
1
DTP2 T/R 211 • Installation and Operation
1 2 3 4
WiFi
Found New
17