Safety; General Information; Liability; Safety Regulations - Proceq Profometer 5+ Operating Instructions Manual

1

Safety

1.1

General Information

1.1.1 Basic Information
The rebar locator complies with state-of-the-art technol-
ogy and the recognized safety regulations.
Please read through these operating instructions care-
fully before initial startup.
1.1.2 Designated Use
The rebar locator is used for the non-destructive location
of rebars and for the measurement of concrete cover
and bar diameters.
1.2

Liability

Our «General Terms and Conditions of Sale and Deli-
very» apply in all cases. Warranty and liability claims
arising from personal injury and damage to property can-
not be upheld if they are due to one or more of the fol-
lowing causes:
- Failure to use the rebar locator in accordance with its
designated use
- Incorrect startup and operation of the rebar locator
- Unauthorized structural modifications to the rebar
locator
- Serious damage resulting from the effects of foreign
bodies, accidents, vandalism and force majeure
2 Safety
1.3

Safety Regulations

1.3.1 Unauthorized Operators
Anyone who is not familiar with the operating instructions
must not use the rebar locator or must be supervised
when using it.
1.3.2 Safety Icons
The following icons are used in conjunction with all
important safety notes in these operating instructions.
Warning!
This note warns you about the risk of material
damage, financial loss and legal penalties
(e.g. loss of warranty rights, liability cases, etc.).
This denotes important information.
1.4

Standards and Regulations Applied

SIA 162 / DIN 1045 / DGZfP B2 / BS 1881: Part 204
© 2007 Proceq SA