AT&T Network Adapter 25 Installation And Maintenance Manual page 412

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTION
9035: inappropriate request
Agent buttons must be on linked-list must be on the same
same station
9 0 3 6 : inappropriate request
can't have identical list
m e m b e r
9 0 3 7 : inappropriate request
must be Monitor button
9038: Removal not allowed
station has parked a call Access button from a station that has
9 0 3 9 Removal not allowed,
station has FPDC logged
i n .
9 0 4 0 PDC removal not allowed,
station is a SLAC position
busy receiver
9 0 4 1 Synchronization error.
9 0 4 2 Synchronization source
e r r o r .
9 0 4 3 Synchronization source Board not a T1 type.
e r r o r .
Incorrect entry,
9 0 4 4
9 0 4 5 Cannot remove this board Existing ports have to be removed
via the HI D CKT menu.
Cannot remove this board The board is a primary or secondary
9 0 4 6
via the HI D CKT menu.
F-34
POSSIBLE SOLUTION
All Agent buttons that are in the same
s t a t i o n .
Not allowed to administer more than
one Agent button of the same type in
a single linked-list.
When administering an Agent button,
action 104 must be a Monitor button
number on the station entered in
Action 103 (supervisor station).
Cannot remove the last System
parked a call.
Remove FPDC from station.
Clear System action 87 first.
Board must have slip detection
e n a b l e d .
Primary and secondary source
cannot be the same.
Data must be between 10 and 40.
f i r s t .
synch source. Remove first.