AT&T Network Adapter 25 Installation And Maintenance Manual page 356

Table E-V. System Administration (Menu=4) (Contd)
ACTION
Specify type of dialing plan for Home
37
Area Code calls
38 Specify the number of digits used for
international dialing
Provide call coverage ringing on internal
40
c a l l s
Specify the number of rings before calls
41
are sent to call coverage or call following
calls return to their home station
Set time of day
50
Set the date
51
Allow SMDR records to be sent to the
52
S M D R p o r t
53 Minimum length of calls that will be
recorded by SMDR (seconds)
Specify the modem request code
60
Does the receiver respond to remote loop
61
Disconnect on loss of carrier
62
Are pins CF and CB common
63
Disconnect on received space
64
Should the system send a space
65
character on disconnect
Enable dial tone for incoming tie trunks?
68
Allow trunk-to-trunk transfer for incoming
69
Loop Start trunks?
70 Should maintenance busy of GS trunks
be blocked?
71 Assign the CO trunk pool access code
Set the number of DID digits used to
72
match against station PDCs
Assign the number of account code digits
73
Display/change expert mode prompt (up
74
to 9 printable characters
November 1995
APPENDIX E: Administration Codes and Data
DESCRIPTION DATA
[0=7-digit dialing;
1 = 10-digit dialing]
[0=13digits,1=15
digits]
[1=Y/0=N]
[0-31 ; 2]
[HHMM]
[MMDDYY]
[1=Y/0=N]
10-255; 40]
[1 -9999; 820]
[1=Y/0=N]
[1=Y/0=N]
[1=Y/0=N]
[1=Y/0=N]
[1=Y/0=N]
[1=Y/0=N]
[1=Y/0=N]
[1=Y/0=N]
[1 -9999]
[2-4; O for none; 3]
[0-15; 15]
["Command:"]
E-37