AT&T Network Adapter 25 Installation And Maintenance Manual page 343

APPENDIX E: Administration Codes and Data
PORT/PDC Administration,
Table E-K.
(Contd)
ACTION
67 Allow terminal to operate at a baud rate
of 9600 bps†
68 Allow terminal to operate at a baud rate
of 19200 bps†
69 Assign this parity setting to correspond
with terminal's parity setting†
70 Allow keyboard dialing/Command Mode†
Allow user configuration of data port
71
parameters.† (The default is 0 for
STARLAN CP.)
72 Allow mismatch of user's data module
and data port baud rate†
73 Allow characters dialed from keyboard
to be echoed by the data port†
Enter your disconnect code†
74
75 Allow call progress text messages to be
displayed on screen.†
77 Display connection indication message†
Assign/remove DDC Display ID
90
† Read-only for STARLAN CP.
E-24
Data Terminals (Menu=1/2)
DESCRIPTION
DATA
[1=Y/0=N]
[1=Y/0=N]
[0-3; 2]
0= Bit in parity
position (no parity);
1 =Bit in parity
position (no parity)
2=Even parity;
3= Odd parity
[1=Y/0=N]
[1=Y/0=N]
[1=Y/0=N]
[1=Y/0=N]
[1=2 short BREAKS/
0=1 long BREAK]
[1=Y/0=N]
[1=Y/0=N]
["11 characters
or less", or ""
to remove]