AT&T Network Adapter 25 Installation And Maintenance Manual page 399

ERROR MESSAGE
AND DESCRIPTION
7005: incorrect entry
incorrect data to restrict
P B X c a l l s
7 0 0 6 : incorrect entry
data can't exceed 120
7 0 0 7 : inappropriate request
must install CAP first
7 0 0 8 : inappropriate request
must install CAP first
7 0 1 0 : out of space
no more room to change
7 0 1 1 : out of space
no more room to add
7 0 1 2 : inappropriate request
PDC already exists
7 0 1 6 : incorrect entry
data can't exceed 1
7 0 1 7 : incorrect entry
must be 0 - 4
7 0 1 9 : PDC out of range
must be 1-9999
7 0 2 0 : entry out of range
data can't exceed 2 digits
7 0 2 1 : incorrect entry
account code can't
exceed 15 digits
APPENDIX F: Administration Error Messages
POSSIBLE SOLUTION
Entered data not valid for restricting
PBX calls.
Number of seconds before a
camped on call returns to the
attendant console [1-1 20].
To install CAP: Go to MENU 1 (Port)
ACTION = 1, DATA = terminal type
(309, or 310)
ACTION = 2, DATA = PDC
Cannot set bit for FPDCs to go to
the CAP because neither the
primary nor secondary CAP is
installed.
Number plan is full.
ID (Name) directory is full.
Check to see if PDC already exists.
Go to MENU 8-Search
ACTION = 1 DATA = 11
Hit c to continue to search for
assigned PDCs
Data must be O-1. See:
MENU = 4 (System)
ACTION = 5
for more information.
Data not valid for number of DID
digits used by PDCs.
System 25 dial codes may have
1,2,3 or 4 digits (1-9999).
Data is greater than 2 digits.
System Maximum Account Code
digits (O-1 5). Default = 15
F-21