AT&T Network Adapter 25 Installation And Maintenance Manual page 413

ERROR MESSAGE
AND DESCRIPTION
9 0 4 7 Incorrect entry.
9048 Cannot change board type Untranslated or (and) remove board
via the HI D CKT menu.
9 0 4 9 Invalid TN or ZTN code forUse correct code to set board options
the HI D CKT menu.
9050 At installed maximum
9 0 5 1 Incorrect entry, board must Board enabled, cannot administer
be disabled.
9052 Cannot change signaling Channel 24 is administered as the
mode channel 24
translated
9 0 5 3 Entry not allowed
9 0 5 4 Incorrect entry
9 0 5 5 Incorrect entry.
9 0 5 6 Entry not allowed
9 0 6 0 Port removal blocked.
9 0 6 1 Translation for port 24
b l o c k e d .
12000 Incorrect action number.
12003 Action number out of
sequence.
12006 Entry out of range
12007 Entry out of range
12008 Action number out of
sequence.
12009 Entry out of range
12010 Entry out of range
APPENDIX F: Administration Error Messages
POSSIBLE SOLUTION
Must be CSS or 0.
f i r s t .
for board type.
System has the maximum number of
board/port type.
signaling mode.
signaling channel.
CSS not administered as a T1 board.
Must be 1 to 5.
Must be CSS.
Slot not administered as a T1 board
or empty.
Final port on T1 board administered
as a synch reference.
Board administered for 24th channel
signaling.
Must be O -3 or next action-button.
Must enter action 1 first.
Data must be 1-255.
Action 3 data cannot exceed 255.
Enter action 1 and/or 2 first.
Data must be 0 or 1.
Data cannnot exceed 104.
F-35