AT&T Network Adapter 25 Installation And Maintenance Manual page 385

ERROR MESSAGE
AND DESCRIPTION
1069: incorrect facility type
incompatible with board
t y p e
1 0 7 0 : facility type out
of range
must be 3-4 digits
1071:
inappropriate request
name does not exist
1072: PDC out of range
can't exceed 4 digits
1 0 7 3 : incorrect entry
must begin with quote
1 0 7 4 : incorrect action number
can't update with 0
1075: entry out of range
data must be 28 digits or
l e s s
1077: incorrect entry
5 zeroes always incorrect
1078: incorrect entry
leading zeroes not
allowed
incorrect action number
1079:
can't exceed 2 with
unequipped facility
incorrect entry
1080:
must be 0 for removal
1081: at installation max
109 MET sets
1 0 8 2 : inappropriate request
TT generator already
installed
APPENDIX F: Administration Error Messages
POSSIBLE SOLUTION
Board and features do not mix.
Check slot location for correct
board or not compatible with the
already entered types on the board.
Must be 3 or 4 digits.
Name does not exists. Go to
MENU 8 (Search)
ACTION = 1 DATA = 40
ACTION = 2 DATA = PDC
Hit c to continue to search for name
associated with PDC, DDC, FPDC,
or DGC.
System 25 dial codes may have
1,2,3 or 4 digits only.
You are administering a character
string and must begin with quotes.
I
Cannot update under action zero.
System Speed Dialing numbers
must be 28 digits or less.
5 zeros are never a legal entry.
Leading zeros are not allowed for
Toll Call Allowed Lists.
Item not installed, cannot enter
items greater then 2.
I
Item must be 0 for removal.
System maximum of 109 MET sets.
TT generator already exists at this
location
F-7