AT&T Network Adapter 25 Installation And Maintenance Manual page 390

APPENDIX F: Administration Error Messages
E R R O R M E S S A G E
AND DESCRIPTION
2 0 3 9 : inappropriate request
buttons fixed- can't
a s s i g n
2 0 4 0 : incorrect PDC
must be station for prime
line pref
2 0 4 1 : inappropriate request
must be ATL set for
prime line pref
2 0 4 3 : out of space
no more button sets
available
incorrect entry
2044:
incorrect board type for
Off Premises (OPX)
2045: incorrect facility type
incompatible with button
incorrect button function
2046:
c o d e
incompatible with facility
2049: incorrect entry
data must be 0-1
2050: inappropriate request
busy station can't be
move destination
incorrect entry
2051:
data can't be 0
2 0 5 2 : inappropriate request
improper procedure
F-12
POSSIBLE SOLUTION
Cannot assign buttons that are
already fixed on the CAP.
Has to be an ATL station to assign
prime line preference.
Has to be an ATL station to assign
prime line preference.
System maximum reached for ATL
stations. No button structure left
for adding a new station or a new
data port.
Has to be TN742 CP for OPX.
Error occurs when administering
button features. Usually relates to
PDC you are trying to specify.
Check validity of PDC/DDC you are
trying to administer.
Incompatible button feature for
station type.
Data value must be 0-1.
Station can't be busy if you are
going to move it.
Entered data for night service
contains leading zero.
Cannot change Toll Calls Allowed
port number here.