Install Customer Service Unit (Csu); Figure 2-24. Ds1 Connections-Non Metallic Connections - AT&T Network Adapter 25 Installation And Maintenance Manual

655 FEET
M A X I M U M
*DSX-1 REFERS
Figure 2-24.
Customer Service
Install
The CSU may either be rack mounted or mounted as a standalone unit. It
can be equipped with several different plug in units, the Signal Monitor Unit,
T1 Office Repeater, and a Fault Location Filter.
Install the Plug In Units
Refer to the documentation provided with the CSU for the information for
setting the options and installing the plug in units.
Mount the CSU
The CSU may either be rackmounted or mounted as a standalone unit. If the
CSU is to be rack mounted, insert the unit and attach it to the cabinet
uprights using four screws.
designated location. The CSU should be mounted as close to the network
interface as possible.
MICROWAVE
INTERFACE
LIGHT-GUIDE
I N T E R F A C E
INFRARED
INTERFACE
A N Y D S 1
INTERFACE
TO A PHYSICAL CROSS-CONNECT FOR DS1 SIGNALS
DS1 Connections—Non Metallic Connections
Unit (CSU)
If the unit is a standalone unit, place it in the
INSTALLATION
MICROWAVE
INTERFACE
LIGHT-GUIDE
I N T E R F A C E
I N F R A R E D
INTERFACE
655 FEET
A N Y D S 1 MAXIMUM
INTERFACE
2-57