AT&T Network Adapter 25 Installation And Maintenance Manual page 318

Administration Codes and Data
The tables in this appendix are intended to help those familiar with system
administration locate specific information without having to refer to the full text in
the Administration Manual.
Default values, if applicable, are indicated in bold print in these tables.
Default Dial Code Assignments
Each time the system is cold started (full-default), default translations are
assigned to ports as shown in the Table below.
Trunk Numbers (not part of dial plan)
Multiline voice terminals
Single-line voice terminals
Data terminals
Loop start TAC
Ground start TAC
Tie trunk TAC
Attendant Call Park
Night Service
Modem Request Code
(Pooled Modem)
ARS
November 1995
APPENDIX E:
Table E-A. Default Dial Codes
PORT
APPENDIX E:
DEFAULT CODE
0001-0104
200-238
300-355
400-599
600-704
100
101
102
800-807
810
820
9
E-1