AT&T Network Adapter 25 Installation And Maintenance Manual page 383

ERROR MESSAGE
AND DESCRIPTION
1044:
inappropriate request
primary or secondary CAP universal port number agrees with the
unavailable
1 0 4 5 : at installed max
-104 data port
1046: incorrect button
function code
button facility already
exists
1047: incorrect button number
out of range or reserved
for system use
1048: inappropriate request
CAP buttons fixed - can't
a s s i g n
1 0 4 9 : inappropriate request
DID trunk can't be pool
m e m b e r
1050:
incorrect facility type
must be ATL set or MET
s e t
1051: inappropriate request
group station max reached in a particular group.
1052: at installed max
-Service Circuit
1 0 5 4 : incorrect button
function code
does not exist or used
i m p r o p e r l y
1055: entry out of range
must be 0-1 with
station/ring enable
APPENDIX F: Administration Error Messages
POSSIBLE SOLUTION
Neither primary nor secondary CAP
one stored by admin. on the stack.
At system maximum of 104 data
p o r t s .
Duplicate button function code found.
Button number out of range for voice
terminal type or certain button types
are not assignable.
Certain feature buttons are not
administrable on the CAP.
A DID trunk cannot be part of an
outgoing trunk pool facility
Must be an ATL or MET set before
you can administer a button feature
or facility type. Facility type cannot
be used in conjunction with this
button function code.
At system maximum for sets allowed
Can only install 1 Service Circuit per
system.
External button code entered by
customer is invalid.
Allow a 0-1 only, any other input is
invalid.
F-5