AT&T Network Adapter 25 Installation And Maintenance Manual page 381

ERROR MESSAGE
AND DESCRIPTlON
1017: inappropriate request
system already has Direct
C A P
1 0 1 8 : inappropriate request
must remove secondary attempting to remove the first CAP.
CAP first
1 0 1 9 : incorrect action number
does not exist or used
improperly
1 0 2 0 : inappropriate request
primary or secondary
CAP does not exist
1021: at installed max
-200 stations
1022: at installed max
-104 trunk
1023:
button function code
out of range
does not exist or used
improperly
1024: at installed max
-300 FPDCs
1025: at installed max -199
EMT sets
1026: at installation max
-96 ATL set
1027:
at installed max
-104 trunk
1028: at installed max
-104 trunk
1029: at installed max
-104 trunk
1030: at installed max
-32 Tie trunk
APPENDIX F: Administration Error Messages
POSSIBLE SOLUTION
Cap already installed
ACTION = 1 (Cap)
Go to MENU 8 (Searches)
ACTION = 1 DATA = 18
ACTION = 2 DATA = 309 or 310
ACTION = 3 DATA = 0
Must remove secondary CAP before
Check if the ACTION value taken is
legal.
Trying to administer features to a
secondary CAP that does not exist.
At the maximum number of stations
allowed by the system.
At the maximum number of trunks
allowed by the system.
Button station out of range for
terminal type code. Check station
for button range. (invalid button
function code)
At system maximum of 300 FPDCs.
At system maximum of 199 EMT
s e t s .
Maximum of 111 ATL sets, 2 of
which have to be CAPS
At system maximum of 104
ground-start trunks.
At system maximum of 104 loop-
start trunks.
At system maximum of 104 DID
t r u n k s .
At system maximum of 32 TIE
trunks.
F-3