AT&T Network Adapter 25 Installation And Maintenance Manual page 402

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTION
7 0 4 7 : incorrect P D C
not in any DGC group
7 0 4 8 : incorrect PDC
not in this DGC group
7049: incorrect PDC
must enter pool member
7050:
action number out of
s e q u e n c e
must enter access code
7 0 5 1 : entry out of range
speed number must be
1 0 0 - 1 8 9
7052: incorrect entry
illegal character within
speed number
7 0 5 3 : entry out of range
must be 0-1 for pooled
modem options
F-24
POSSIBLE SOLUTION
Can verify that the PDC is not in a
DGC group by:
Go to MENU = 8 Search
ACTION = 1 DATA = 6
ACTION = 2 DATA = PDC
(hit c to continue)
Do a Search to find the DGC group
the PDC is a member of.
Go to MENU = 8 Search
ACTION = 1 DATA = 6
ACTION = 2 DATA = PDC
(hit c to continue)
Incorrect virtual facility access code.
Must administer the access code
before administering the speed
dialing number.
Go to MENU = 4
System Administration
ACTION = 25 DATA = 100-189
ACTION = 26 DATA = Speed
Number [0-9, * , #]
Must administer the access code
before administering the virtual
facility number.
ACTION = 25 DATA = 190-199
ACTION = 26 DATA = VF number
[ 0 - 9 * , # ]
Access code must be 100-189 for
system speed dialing.
Speed number must be [0-9, *, #].
Under Administering System-Wide
Options in the Admin. manual for
pooled modem options must be a
0 - 1