Infineon PSoC 4 Quick Start Quide page 28

PSoC 4 Programming Using an External Microcontroller (HSSP)
Testing the Example Projects
If the programming operation fails, the terminal displays the step and error code that you can use to
d)
debug the project.
Figure 13 Terminal Display
6. Reprogram PSoC 5LP with the kit firmware:
Open PSoC Programmer.
a)
Enter the bootloader as described in step 2.
b)
Go to the Utilities tab and click Upgrade Firmware to reprogram PSoC 5LP with the original kit firmware.
c)
Figure 14 Upgrade Firmware using PSoC Programmer
Application Note 28 of 45 001-84858 Rev. *N
2021-03-23