Infineon PSoC 4 Quick Start Quide page 22

PSoC 4 Programming Using an External Microcontroller (HSSP)
Testing the Example Projects
The project requires the changes listed in
CY8CKIT-042-BLE. Note that corresponding changes should be done in the RegisterDefines.h file in the project.
Table 10 Pin Assignments for Different Kits
Host Pin CY8CKIT-040 CY8CKIT-042 CY8CKIT-043 CY8CKIT-044
Pin_SWDCK P12[3]
Pin_SWDIO P12[2]
Pin_XRES P12[4]
To test this project, follow these steps:
Prepare the B_Hssp_Pioneer project:
1.
Generate the files containing the programming data (HexImage.c, HexImage.h) for your target PSoC 4
a)
device using the HexFile
Replace the existing HexImage.c and HexImage.h files with the generated ones.
b)
Double-click the bootloadable Component in TopDesign.cysch.
c)
Select the Dependencies tab and click on the browse button associated with Bootloader HEX file as
d)
shown in Figure 5.
Navigate to the PSoC 5LP Bootloader Files > KitProg folder provided with the application note and select
e)
KitProg_Bootloader.hex.
The Bootloader ELF file is automatically generated when you select the Bootloader HEX file.
Figure 5 Bootloadable Dependencies for KitProg
Build the B_Hssp_Pioneer project.
f)
Application Note
Table 10 to work on CY8CKIT-040, CY8CKIT-042, CY8CKIT-044,
P2[1] P12[3]
P2[0] P12[2]
P2[4] P12[4]
Parser.
22 of 45
CY8CKIT-046
P12[3] P12[3]
P12[2] P12[2]
P12[4] P12[4]
CY8CKIT-
042-BLE
P12[3]
P12[2]
P12[4]
001-84858 Rev. *N
2021-03-23