Infineon PSoC 4 Quick Start Quide page 26

PSoC 4 Programming Using an External Microcontroller (HSSP)
Testing the Example Projects
Double-click the bootloadable Component in TopDesign.cysch.
c)
Select the Dependencies tab and click Browse associated with the Bootloader HEX file as shown in
d)
Figure 10.
Navigate to the PSoC 5LP Bootloader Files > KitPog2 folder provided with the application note and
e)
select KitProg2_Bootloader.hex for the Bootloader HEX file field.
The Bootloader ELF file will be automatically generated on selecting the Bootloader HEX file.
Figure 10 Bootloadable Dependencies for KitProg2
Build the B_Hssp_Pioneer project.
f)
2. Enter PSoC 5LP bootloader in the Pioneer kit:
Remove the power supply by unplugging the USB cable.
a)
Press and hold SW3 of the kit and plug in the USB cable.
b)
LED2 starts to blink, indicating that PSoC 5LP is in the bootloader mode.
CY8CKIT-041-040xx Kit and the location of LED2 and SW3.
Figure 11 CY8CKIT – 041-040xx
Application Note 26 of 45
Figure 11 shows the PSoC
001-84858 Rev. *N
2021-03-23