Safety; Introduction; Intended Use And Reasonably Foreseeable Misuse; Qualification Of Installer - Shell NewMotion Home Advanced 2.1 Installation Manual

2. Safety

2.1.

Introduction

Observe the instructions in this manual before you start working with the product. If you fail to follow the instructions
from this manual you can put yourself and others in danger.
Always comply with the information, such as labels and the nameplate, attached directly to the product and keep the
information in a legible condition.
Always comply with any applicable laws and regulations that have not been accounted for in this manual.
2.2.

Intended use and reasonably foreseeable misuse

Home Advanced 2.1 / 2.2 is a charge point intended for charging electrical vehicles compatible with IEC-61851 Mode 3
definition and requirements. Electrical vehicles and cables used with this charge point should always be undamaged
and in their original state.
The product must only be operated within its performance limits and under the permitted ambient conditions, see
chapter 3.3. Technical specifications.
The following is considered foreseeable misuse:
• use of adaptors, conversion adaptors or extension sets for cables.
• use in an environment that varies from or exceeds the given environmental conditions.
• use that varies from or exceeds the given operating conditions.
• failure to comply with the instructions in this manual.
• failure to eliminate faults, malfunctions or defects of the product that impose safety risks.
• unauthorized removal or modification of parts or safety devices of the product.
• use of spare parts or accessories that have not been approved by the manufacturer.
• operation in a flammable and/or explosive environment.
2.3.

Qualification of installer

Only authorised technicians are allowed to perform installation and maintenance of the product. They must possess the
following qualifications:
• are familiar and abide by the safety instructions and sections of this manual related to installation of the product;
• are familiar with and abide by the applicable local, national and international laws and regulations;
• are able to recognize the possible dangers of the product and take the necessary measures to protect persons and
property.
2.4.

Protective measures

2.4.1. Personal protective equipment (PPE)

Installation manual – NewMotion Home Advanced 2.1 / 2.2 - 071NMEN13
Wear insulating gloves while installing wires and electrical components to avoid damages from static
discharge.
Wear S3 class antistatic safety shoes.
Wear safety goggles/glasses while drilling holes to protect your eyes from dust or other particles that may
damage your eyes.
EN
5