Pavement Mount - Shell NewMotion Home Advanced 2.1 Installation Manual

5 . 4 . 2 . Pavement mount

u
1 . Place the pole on the pavement and mark the locations for the holes (see fi gure 16 ).
2 . Remove the pole and drill holes into the pavement for the wedge bolts or chemical anchors.
NOTICE Check the fastener package for the correct diameter and depth.
3 . Secure the fasteners into the holes. Allow the chemical anchor to dry, if applicable.
4 . Feed the power cable and optional data cable(s) through the pole (see fi gure 17 ).
5 . Secure the pole to the fasteners using 4 washers and nuts (not provided) (see fi gure 18 ).
6 . Remove any excess threaded rod, if necessary.
T20
7 . Remove the rear cable clamp (see fi gure
8 . Insert the coloured grommet matching the power cable thickness into the rear input hole (see fi gure
NOTICE
Use a caliper to measure the thickness of the power cable and determine the correct coloured grommet.
Installation manual – NewMotion Home Advanced 2.1 / 2.2 - 071NMEN13
i
p
191
).
o
Ø10 - 13 mm
Ø13 - 15.5 mm
Ø15.5 - 18 mm
Ø18 - 21 mm
Ø21 - 22.5 mm
192 ).
19
EN