Table of Contents
Advertisement
Ä Connect the PC to the IO-Link USB master.
1
IO-Link USB master
2
Plug-in power supply unit
3
PC
Fig. 8.1:
PC connection via the IO-Link USB master
ð The wizard for searching for new hardware starts and installs the driver for the IO-Link USB master
on the PC.
8.2.5
Connecting IO-Link USB master to the sensor
Prerequisites:
• IO-Link USB master and PC are connected via the USB interconnection cable.
• IO-Link USB master is connected to the mains supply with the plug-in power supply unit.
NOTICE
Connect the plug-in power supply unit for IO-Link USB master!
Ä To connect the sensor, the plug-in power supply unit must be connected to the IO-Link USB
master and the mains supply.
The voltage supply via the USB interface of the PC is permissible only for IO-devices with a
current consumption of up to 40 mA at 24 V.
NOTICE
Included in the delivery contents of the IO-Link USB master is a USB interconnection cable for
connecting the PC to the IO-Link USB master as well as a plug-in power supply unit and a short
description.
The mains supply of the IO-Link USB master via the plug-in power supply unit is only activated if
IO-Link USB master and PC are connected via the USB interconnection cable.
Ä Connect the IO-Link USB master to the M12 connection of the sensor via an interconnection cable.
The interconnection cable is not included in the delivery contents and must be ordered separately if
needed (see chapter 13.3.1 "Accessories – PC connection").
Leuze electronic
1
ODS 10
Connecting to a PC – Sensor Studio
2
3
44
Advertisement
Table of Contents
