Table of Contents
Advertisement
8.2.2
Installing the Sensor Studio FDT frame
NOTICE
First install the software!
Ä Do not yet connect the IO-Link USB master to the PC.
First install the software.
NOTICE
If FDT frame software is already installed on your PC, you do not need the Sensor Studio instal-
lation.
You can install the communication DTM (IO-Link USB master) and the device DTM (IO-Link de-
vice ODS 10) in the existing FDT frame.
Ä Start your PC with administrator privileges and log on.
Ä Download theSensor Studio configuration software from the Internet: www.leuze.com > Products
> Measuring sensors > Distance sensors > Optical distance sensors > ODS 10 > Downloads tab
> Software/Driver
Ä Copy the file into a suitable folder on your hard drive and unpack the zip file.
Ä Start the SensorStudioSetup.exe file and follow the instructions on the screen.
ð The installation wizard installs the software and places a shortcut on the desktop (
8.2.3
Installing drivers for IO-Link USB master
Ä Select the IO-Link USB Master installation option and follow the instruction on the screen.
ð The installation wizard installs the software and places a shortcut on the desktop (
8.2.4
Connecting IO-Link USB master to the PC
The sensor is connected to the PC via the IO-Link USB master (see chapter 13.3.1 "Accessories – PC con-
nection").
Ä Connect the IO-Link USB master to the plug-in power supply unit or the mains supply.
NOTICE
Included in the delivery contents of the IO-Link USB master is a USB interconnection cable for
connecting the PC to the IO-Link USB master as well as a plug-in power supply unit and a short
description.
The mains supply of the IO-Link USB master via the plug-in power supply unit is only activated if
IO-Link USB master and PC are connected via the USB interconnection cable.
Leuze electronic
Connecting to a PC – Sensor Studio
ODS 10
).
).
43
Advertisement
Table of Contents
