Table of Contents
Advertisement
8.1
System requirements
To use the Sensor Studio configuration software, you need a PC or laptop with the following specifications:
Tab. 8.1:
System requirements for Sensor Studio installation
Operating system
Computer
Graphics card
Additionally required capacity for Sensor Studio and
IO-Link device DTM
NOTICE
Administrator privileges on the PC are necessary for installing Sensor Studio.
8.2
Installing Sensor Studio configuration software and IO-Link USB master
NOTICE
The installation files of the Sensor Studio configuration software must be downloaded from the
Internet at www.leuze.com.
For subsequent updates, you can find the most recent version of the Sensor Studio installation
software on the Internet at www.leuze.com.
8.2.1
Downloading configuration software
Ä Call up the Leuze home page: www.leuze.com
Ä Enter the type designation or part number of the device as the search term.
Ä The configuration software can be found on the product page for the device under the Downloads tab.
NOTICE
On delivery, the device is configured for HID operation (Human Interface Device). The device
can thereby be operated directly via the Windows application.
Leuze electronic
Connecting to a PC – Sensor Studio
Windows 7
Windows 8
• Processor type: 1 GHz or higher
• USB interface
• CD-ROM drive
• Main memory
• 1 GB RAM (32-bit operating system)
• 2 GB RAM (64-bit operating system)
• Keyboard and mouse or touchpad
DirectX 9 graphic device with WDDM 1.0 or higher
driver
350 MB hard drive memory
64 MB main memory
ODS 10
42
Advertisement
Table of Contents
