Leuze electronic ODS 10 Operating Instructions Manual page 46

Ä Select the Device selection without communication connection (offline) configuration mode and
click on [Next].
ð The Project Wizard displays the device selection list of the configurable devices.
Fig. 8.2: Device selection
Ä Select the connected sensor according to the configuration in the device selection and click on [Next].
ð The device manager (DTM) of the connected sensor starts with the offline view for the Sensor Studio
configuration project.
Ä Establish the online connection to the connected sensor.
In the Sensor Studio FDT frame, click on the [Establish connection with device] button (
In the Sensor Studio FDT frame, click on the [Online parameters] button (
ð The IO-Link USB master synchronizes with the connected sensor and the current configuration data
and measurement data are displayed in the device manager (DTM).
Leuze electronic
Connecting to a PC – Sensor Studio
ODS 10
).
).
46