Mac Filtering - ADTRAN SmartRG SR555ac User Manual

Field Name
Source Port (port or
port:port)
Destination IP address
[/prefix length]
Destination Port (port or
port:port)
WAN Interfaces

MAC Filtering

On this page, you can manage MAC filtering for your gateway.
Your gateway can block or forward packets based on the originating device. This MAC filtering feature is available only in Bridge
mode. For other modes, similar functionality is available via IP Filtering.
1. In the left navigation bar, click
2. To modify settings for an existing policy, click the
are BLOCKED and FORWARD. The page refreshes, showing that the action has changed. The
acts like a toggle switch, clicking it switches the policy from BLOCKED to FORWARD and back again.
3. To add a MAC filtering rule, click
4. To remove a rule, click the
5. When your changes are completed, click
SmartRG Inc., an ADTRAN Company Proprietary and Confidential. All Right Reserved. © 2020
Description
Enter a source port number or range (xxxxx:yyyyy).
Enter the destination IP address for this filter. For IPv6, enter the prefix as well.
Enter destination port number or range (xxxxx:yyyyy).
Click to apply this rule to all WAN interfaces or only certain types. Options are Select All or select
any of the types defined for your network. the default is Select All.
Advanced Setup
Add and follow the instructions in
Remove checkbox next to the rule and click Remove.
Apply/Save
> Security > MAC Filtering. The following page appears.
Change checkbox next to it, and then click
Adding a MAC
to commit your changes.
Change Policy. Options
Change Policy button
Filter.
68