Extron electronics DTP2 T 201 D User Manual page 32

On the Add Device... window, the path to the new firmware file is displayed in the
Path field (see figure 23,
DTP2 T 201 D
DTP2 T 201 D
1
DTP2T201D\dtp2t201d_A_v1.00_081518.S19
3
2
Figure 23. Path to New Firmware File on the Add Device Window
10. If this is the only device uploading firmware, click Add (
added to the Device section of the Firmware Loader window and the Add Device
window closes.
If firmware is uploading to multiple devices, do the following:
a. Click Add Next (
3
Firmware Loader window, and the Add Device... window remains open.
b. For each additional device that needs to be added to the Firmware Loader
window, repeat steps 4 through 9, then click Add Next(
c. For the last device, click Add (
close the Add Device... window.
1 1 1
60-1741-53
DTP2 T 201 D
Figure 24. Firmware Loader Screen with a DTP2 T 201 D Added
To remove a device from the Device section, do the following:
11.
a. Click on the names of the devices to be deleted, highlight them (see figure 24,
b. Click on the Edit tab (see figure 25,
DTP2 T 201 D Transmitter • Remote Configuration and Control
).
1
). The first device is added to the Device section of the
), instead of Add Next (
2
1.00.001
dtp2t201d_A_v1.00.00...
, on the next page) in the menu bar.
1
). The device name is
2
).
3
), to add the device and
3
2 2 2
Extron USB Devi... Connected
Lorem i
).
1
24